Refurbished assets are used but have been inspected, tested, and restored to full working condition.
Bazooka EL260 300Watt MAX Car amplifier 2 x 60 Watts at 4 ohms
The (factory refurbished) Bazooka Elevated Listening (EL) Amplifiers quickly became legendary for their price to performance ratio. Newly redesigned for 2003. And, if that wasn’t enough, we added liquid cooling to keep the amps running their best under harsh conditions. These amplifiers all feature MOSFET devices, optional Remote Bass Control Modules (RBCM), and even an auxiliary output for a daisy chain connection of an amplified EL Bazooka tube subwoofer using the ELA-EXT. For the combination of performance and price, these amplifiers are in a class by themselves! -----30 Day Warranty on Bazooka Amplifiers-----
70 Watts RMS X 2 At 4 Ohms
95 Watts RMS X 2 At 2 Ohms
190 Watts X 1 In Bridged Mode
Variable High-Pass/Low-Pass Crossover, 12 DB Per Octave
MOSFET Output Devices
Variable Bass Boost
Output Port For Easy Connection Of Bazooka EL-Series Amplified Bass Tube
Speaker-Level And Preamp-Level Inputs Allow Connection To Any System
Dimensions: 9-13/16"W X 2-5/8"H X 10-1/4"D
Left Side of the Amplifier:
Remote: mini-jack for use with the optional Remote Bass Control Module
Hi Input: 5-pin male jack for use with supplied speaker-level input harness
Input: gold-plated RCA stereo jacks
Level: gain control that allows you to match the input sensitivity of the amplifier to the particular source unit you are using
Filter Switch: lets you select high-pass, low-pass, or full-range operation for the internal crossover
X-Over: allows you to adjust the frequency of the crossover from 60-400Hz
Bass Boost: a rotary control that allows you to set the bass boost applied to the speaker output signal. The bass boost is centered at 45Hz and is adjustable from 0-12dB.
Power LED: illuminates green when the amplifier is on and receiving power
Right Side of the Amplifier:
+12 (power): gold-plated set screw terminal that will accept up to 8 gauge wire (requires a 2mm Allen wrench)
GND (ground): gold-plated set screw terminal that will accept up to 8 gauge wire (requires a 2mm Allen wrench)
REM (remote turn-on): gold-plated set screw terminal that will accept up to 8 gauge wire (requires a 2mm Allen wrench)
Speakers: gold-plated set screw terminals that will accept up to 8 gauge wire (requires a 2mm Allen wrench)
Aux Output: 6-pin male jack that connects to an optional ELA-hp series amplified bass tube using an optional harness
Fuses: one20-amp blade fuse for the amplifier and one 7.5-amp blade fuse for the aux output
Refurbished Refurbished assets are used but have been inspected, tested, and restored to full working condition. They come in original packaging and contain Manuals plus additional parts and/or accessories. Due to their operational history, refurbished assets possess noticeable cosmetic defects and blemishes, including but not limited to dents, scratches, and signs of age.